Three-dimensional mixed convection flow with variable thermal conductivity and frictional heating

In this article,three-dimensional mixed convection flow over an exponentially stretching sheet is investigated.Energy equation is modelled in the presence of viscous dissipation and variable thermal conductivity.Temperature of the sheet is varying exponentially and is chosen in a form that facilitates the similarity transformations to obtain self-similar equations.Resulting nonlinear ordinary differential equations are solved numerically employing the Runge-Kutta shooting method.In order to check the accuracy of the method,these equations are also solved using bvp4c built-in routine in Matlab.Both solutions are in excellent agreement.The effects of physical parameters on the dimensionless velocity field and temperature are demonstrated through various graphs.The novelty of this analysis is the self-similar solution of the threedimensional boundary layer flow in the presence of mixed convection,viscous dissipation and variable thermal conductivity.     

量子垒生长速率对InGaN基绿光LED性能的影响

利用MOCVD技术在图形化Si(111)衬底上生长了InGaN/GaN绿光LED外延材料。在GaN量子垒的生长过程中,保持NH3流量不变,通过调节三乙基镓(TEGa)源的流量来改变垒生长速率,研究了量子垒生长速率对LED性能的影响。使用二次离子质谱仪(SIMS)和荧光显微镜(FLM)分别对量子阱的阱垒界面及晶体质量进行了表征,使用电致发光测试系统对LED光电性能进行了表征。实验结果表明,垒慢速生长,在整个测试电流密度范围内,外量子效率(EQE)明显提升。我们认为,小电流密度下,EQE的提升归结为量子阱晶体质量的改善;而大电流密度下,EQE的提升则归结为阱垒界面陡峭程度的提升。     

MM工质热分解及其对ORC系统影响的研究

热稳定性是限制有机工质在有机朗肯循环(Organic Rankine Cycle,ORC)使用的重要因素。硅氧烷类工质具有低毒环保、化学性质稳定等优点,适用于150~350℃热源。本文研究了六甲基二硅氧烷(MM)工质热分解的特点及其对ORC系统的影响,结果表明,MM的热分解产物为硅氧烷类化合物及微量气态小分子碳氢化合物;热分解将导致系统性能下降,分解量足够大时,会出现蒸发器换热不充分导致膨胀机入口处工质干度低于1从而影响机组安全的问题。     

基于数字全息的热透镜效应测量

提出一种数字全息定量测量半导体激光二极管侧面泵浦Nd∶YAG晶体热透镜效应的方法。CCD采集Nd∶YAG晶体在不同泵浦电流下的数字全息图,通过数值重建得到热透镜效应引起的相位分布及其变化过程。再由相位分布计算得到对应的热透镜焦距。实验结果表明,利用数字全息技术可以准确和有效测量热透镜效应及热透镜焦距。     

Stabilization of polystyrene by styrylquinoline containing methacrylates

Abstract

The thermostability of polysterene with/without new styrylquinoline containing methacrylic fragments has been described in the present work. Polystyrene and copolymers based on styrene and new methacrylic styrylquinoline containing monomers were synthesized by free radical thermoinitiated polymerization in the presence of 2,2′-azobisisobutyronitrile (1?wt%) as initiator at inert atmosphere. The impact of 2-[2-(4-methoxyphenyl)ethenyl]quinolin-8-yl 2-methylpropyl-2-enoate (М1), 2-(2-phenylethenyl)quinolin-8-yl 2-methylpropyl-2-enoate (М2), 2-[2-(4-nitrophenyl)ethenyl]quinolin-8-yl 2-methylpropyl-2-enoate (М3) on thermal stability of polystyrene was investigated. The thermostability of polystyrene and copolymers ST:M1, ST:M2, ST:M3 were studied by dynamic thermograviametric analysis. It was shown that destruction of polystyrene with corresponding units M1-M2 starts at 41–42°С higher, than reference polystyrene.     

Emergence of a non-Fowler-Nordheim-type behavior for a general planar tunneling barrier

In this work we investigate a generalized tunneling barrier for planar emitters at zero-temperature. We present the evidence of the emergence of a non-Fowler-Nordheim-type general behavior for the field emission current density in the case that the Fermi energy (μ) is comparable with or smaller that the decay width ($d_F$). Therefore, for some non-metals or materials that have very small Fermi energy the standard Fowler-Nordheim-type theory may require a correction. In the opposite regime, i.e., for μ much larger that $d_F$, we confirm that the conventional theory is suitable for metals.     

Properties of RhP predicted by first-principles

Using density functional theory combined with a global crystal structure search with the particle swarm optimization method, we propose three stable three-dimensional (3D) metallic RhP structures, namely, the Cmcm (RhP-I), P6/mmm (RhP-II), and P6₃mc (RhP-III) phases. All these structures are found to be dynamically stable through vibrational normal mode calculations, indicating that they could be successfully synthesized in experiments. We show that the RhP-I phase has a relatively high thermodynamic stability and high mechanical strength in comparison with the others. The RhP-II and RhP-III phases have porous structures which could accommodate small atoms or molecules. However their thermodynamics are poor, especially the RhP-III phase. The RhP-II structure is stable at 500 K, but the RhP-III fails to survive even at the freezing point of water. Importantly, all these materials have one dimensional conducting channels corresponding to ultrahigh Fermi velocities. Moreover, the porous hexagonal RhP-II and III structures exhibit excellent ability to trap lithium, hydrogen, oxygen, and boron atoms. The RhP-II structure could be especially useful for directly dissociating the hydrogen molecule into two atoms without an energy barrier. In the present study, we identify three new metallic structures to the family of RhP structures, and anticipate their potential for technological applications.     

915 nm宽条形半导体激光器输出特性

为了研究温升对915 nm宽条形应变量子阱半导体激光器输出特性的影响,搭建了基于半导体制冷片(TEC)的双向温控平台对其进行了测试。首先,改变激光器的外表面温度,测量其在不同注入电流时的光功率和波长,并利用CCD相机测量其慢轴发散角。然后,利用计算机仿真软件对激光器的工作状态进行稳态模拟,从而获得了其对应的热分布情况,通过将模拟得到的数据与实验测量的结果进行比较,获得了两者趋于一致的结论:当热功率从2.1 W升高至20.0 W时,慢轴发散角从2.6°增大至5.0°,同时波长发生红移,热透镜焦距减小;激光器波长随温度变化关系的系数约为0.4 nm/℃,器件热阻为1.5 K/W。因此,为了同时获得高的输出功率和稳定的输出波长,有必要将激光器外表面温度精确控制在某一数值,否则波长将会发生漂移;此外,在设计制作高功率半导体激光器时,通过适当增加条宽并采用散热良好的封装结构,可以减小对慢轴发散角的影响。     

铅基堆超临界CO2复合循环发电系统热力学分析

本文对比了再压缩超临界CO2 (S-CO2)循环、蒸汽朗肯循环、He布雷顿循环分别应用于铅基堆的最优热学性能,明确了S-CO2循环与铅基堆结合较传统循环的热力学优势。为进一步提高再压缩S-CO2循环的效率,以跨临界CO2 (T-CO2)循环为底循环构建了再压缩S-CO2/T-CO2复合循环,探讨了不同顶循环透平入口温度、压力和压缩机入口温度条件下系统性能的变化规律,对比了S-CO2/T-CO2复合循环和S-CO2循环的热学性能。结果表明:铅基堆再压缩S-CO2循环发电系统较传统循环形式具有更高的热效率;构建的S-CO2/T-CO2复合循环能够有效提高S-CO2循环的效率,在所研究参数范围内,S-CO2/T-CO2复合循环的热效率和效率比S-CO2循环分别最大可提高约4.8%和8.3%;再压缩S-CO2循环和S-CO2/T-CO2复合循环热学性能随顶循环关键参数变化规律具有一致性。     

The effect of two ferromagnetic metal stripes on valley polarization of electrons in a graphene

As the key factor for designing the valleytronic devices is to well understand the valley-dependent transport mechanism in graphene, we investigate, in this work, the effect of two ferromagnetic (FM) metal stripes on the valley polarization in a graphene nanostructure with a strain. The nearly 100% valley polarization is observed at certain energy windows and it can be easily controlled through changing the width and the position of the FM stripe as well as the strength of the magnetic field induced by the FM stripe. Our interesting findings reveal the valley-dependent transport mechanism of electrons and promote the realization of the new types of valleytronic devices modulated by the FM stripe and the strain.